Fingerprint Identification Ring Indicator Light Access Control Board
8 reviews

Features:


K261 is designed for low power consumption, the power supply is DC12V, the relay time can be adjusted by rotating the button, relay time:
0.5-13 seconds.
It is very easy to register fingerprint, just need to press SET button to register fingerprint and long press SET button to back to factory default.
SET Button:
Press SET button shortly,blue indicator light in control board flash fast and system in register state, put the same finger with multiple times on fingerprint collection area, until hearing music means fingerprint register successful. Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting a few seconds to exit.
Back to factory default:
Press SET button until hear “Di” long beep and music,means initialization operation successful.
Set Relay Time:
Rotate the relay rotation button to set the closing time of the relay from 0.5 to 13 seconds. The relay is contact output, switch signal, no voltage output.
Usage:
Press the finger,the relay closes after the fingerprint passes, and the closing time is determined by relay rotation button.

SPECIFICATIONS


Power supply:
DC12V, >500mA
Output:
Relay(Max. current:10A)
Standby current:
12uA
Fingerprint capacity:
120 pieces
Size:
62*25.4mm

GARANTIE

We betalen je geld terug als het artikel niet binnen 40 dagen na aankoop is geleverd. U heeft 2 weken om een terugbetaling aan te vragen - tot dag 60.
Product komt niet overeen met de beschrijving? Neem binnen 30 dagen na ontvangst contact met ons op!
In geval van annulering wordt het geld binnen 3 dagen teruggestort op uw rekening.