Infrared Transceiver Transmitter Ir Emitter Module
SKU #6937535316004
Тип: Wireless Transmitters
Наличност: В наличност
Цени, започващи от: $ 25752.59
БЕЗПЛАТНО ПРОСЛЕДЯВАНЕ НА ДОСТАВКА ПО СВЕТА
Features:
The Infrared Emitter (Link) is based on NE555 infrared transmitter module. 38KHz carrier circuit board produced by the NE555, no MCU's PWM pins to reduce the corresponding code, reducing the burden on the MCU. SIG module pin is high, the module will send an infrared signal of 38KHz, SIG pin is low, the module will stop sending infrared signals, the use of very simple, so ordinary single-chip infrared remote control can also be easily produced items .
SIG pin current:
High lelel 0.4mA (max), low level 1.4mA (max)
You can manually adjust the direction of the launch tube according to the actual application requirements
Great for infrared remote control projects
Infrared Receiver (Link) module:
This is infrared receiver module based on integrated infrared receiver head. It can receive the modulated infrared signal of 38KHz that is sent by the IR transmitter module and demodulate it into logic level, when it gets the modulated infrared signal, it outputs one negative pulse and returns to normalcy (High level). The infrared receiver module and transmitter module can complete the infrared remote control with the codec program.
Specifications:
Type:
Industrial Computer Accessories
Package:
Yes
Model Number:
IR Emitter + IR Receiver
Operating voltage:
3.0 - 5.5VDC
Operating Current:
2mA (max)
Receiving angle:
90 degrees
Compatibility:
compatible for Arduino.
Operating voltage:
4.5 - 5.5VDC
Operating Current:
50mA (max)
Emission angle:
45 degrees
Package Include:
1 x Infrared Emitter with 38K Carrier
1 x Infrared Receiver
Note:
1 Set = 1 x Infrared Emitter + 1 x Infrared Receiver
Продуктът не отговаря на описанието? Свържете се с нас в рамките на 30 дни след получаването му!
В случай на анулиране, парите ще бъдат възстановени по сметката ви в рамките на 3 дни.
The Infrared Emitter (Link) is based on NE555 infrared transmitter module. 38KHz carrier circuit board produced by the NE555, no MCU's PWM pins to reduce the corresponding code, reducing the burden on the MCU. SIG module pin is high, the module will send an infrared signal of 38KHz, SIG pin is low, the module will stop sending infrared signals, the use of very simple, so ordinary single-chip infrared remote control can also be easily produced items .
SIG pin current:
High lelel 0.4mA (max), low level 1.4mA (max)
You can manually adjust the direction of the launch tube according to the actual application requirements
Great for infrared remote control projects
Infrared Receiver (Link) module:
This is infrared receiver module based on integrated infrared receiver head. It can receive the modulated infrared signal of 38KHz that is sent by the IR transmitter module and demodulate it into logic level, when it gets the modulated infrared signal, it outputs one negative pulse and returns to normalcy (High level). The infrared receiver module and transmitter module can complete the infrared remote control with the codec program.
Specifications:
Type:
Industrial Computer Accessories
Package:
Yes
Model Number:
IR Emitter + IR Receiver
Operating voltage:
3.0 - 5.5VDC
Operating Current:
2mA (max)
Receiving angle:
90 degrees
Compatibility:
compatible for Arduino.
Operating voltage:
4.5 - 5.5VDC
Operating Current:
50mA (max)
Emission angle:
45 degrees
Package Include:
1 x Infrared Emitter with 38K Carrier
1 x Infrared Receiver
Note:
1 Set = 1 x Infrared Emitter + 1 x Infrared Receiver
ГАРАНЦИЯ
Ще възстановим парите ви, ако артикулът не е доставен в рамките на 40 дни след покупката. Имате 2 седмици да поискате възстановяване на сумата - до ден 60.Продуктът не отговаря на описанието? Свържете се с нас в рамките на 30 дни след получаването му!
В случай на анулиране, парите ще бъдат възстановени по сметката ви в рамките на 3 дни.