Univerzalne bakrene aluminijaste fuksne elektrode za varjenje palic za enostavno taljenje varilne žice

Univerzalne Bakrene Aluminijaste Fuksne Elektrode Za Varjenje Palic Za Enostavno Taljenje Varilne žice
10 reviews

SKU #5050079641636

Tip: Solder & Flux

Razpoložljivost: Na zalogi

Cene od: $ 20.39

BREZPLAČNA GOSPODARSTVA PO SVETU

LASTNOSTI:

Ni treba spajkati v prahu
Easy Melt z nizkim tališčem, približno 380?
Pogosto se uporablja, v glavnem se uporablja za hladilnik, klimatsko napravo, kolesa, lokomotivne predelke, zabojnike za kemikalije, ladjedelništvo itd.

SPECIFIKACIJE:

Material:
baker aluminij
Tališče:
približno 380?
Premer:
1,6 mm, 2 mm
Dolžina:
1M, 3M, 5M
Tip:
Univerzalni in primeren za vse vrste kovin
Značilnost:
Elektroda s fluksnim jedrom, prah za spajkanje ni potreben, enostavno taljenje
Uporaba:
nerjaveče jeklo, baker, aluminij, železo, hladilnik, klimatska naprava in drugo varjenje kovin

KAKO UPORABITI:

Prvi korak:
čiščenje in poliranje površine osnovnega materiala.
Drugi korak:
segrevanje površine osnovne kovine na varilnem mestu, dokler temperatura ne doseže delovne temperature varilne žice 380 ° C, tako da lahko varilna žica nastane s toplotno prevodnostjo osnovne kovine.

OPOMBE:

Ne uporabljajte plamena za izgorevanje varilne žice in šele, ko je temperatura površine navadne kovine zadostna, lahko varilna žica teče in prodre v kovinsko kapilaro

GARANCIJA

Denar vam bomo vrnili, če artikel ni bil dostavljen v 40 dneh po nakupu. Za vračilo kupnine imate na voljo 2 tedna - do 60. dne.
Izdelek se ne ujema z opisom? Pišite nam v 30 dneh po prejemu!
V primeru preklica bo denar vrnjen na vaš račun v roku 3 dni.

OCENE

Как указано толщина 1,6мм и в длинну 1м. На деле не проверял 23 Jan 2021 08:05

L***f from UNITED STATES

Флюс присутствует! 09 Jan 2021 12:42

S***v from UNITED STATES

Product As Described 29 Jan 2021 06:19

L***A from MALAYSIA

припой пришёл. посылка пришла быстро. всё устраивает. в деле не проверял. но испытаю, дополню отзыв. спасибо продавцу за скорость и качество обслуживания. 29 Jan 2021 10:52

G***v from BELARUS

Packaging Whole Don't Meryl How Much 14 Jan 2021 00:19

3***r from RUSSIA

Solder That Surprisingly Keeps The Tinplate Well Does Not Break, I Do Not Know How Other Metals Have Not Yet Tried. Solder Can Go A Lot On Soldering Better Have Stock. 27 Nov 2020 08:20

A***v from RUSSIA

Great Solder. Low-temperature. The Main Thing Is Not To Overheat The Surface, Or Then The Flux Burns And Wetted Metals. 29 Dec 2020 07:44

E***t from BELARUS

Black Metals, Including Stainless Steel, Soldering Perfectly. Up To Red Categorically Warm Can Not Be-the Flux Burns And The Solder Does Not Spread. When Soldering Thick With Thin Heat The Main Flame Thick Piece, And Thin Let The Most Edge Of The Flame Warm, So As Not To Blush. After Heating, Reduce The Flame To A Minimum, And Then Apply The Solder To The Details-should Be Spread With A Thin Layer. Freely Flows Through The Thread Between The NUT And The Bolt, If Both Parts Were Fully Heated, But Not Overheated. When The Parts Are Overheating, Then Solder Just Going Into The Ball, Since The Flux Evaporated And Solder Can Not Melt. Do Not Forget To Mechanically Clean The Details-a Soldering Is Significantly Simplified, Even On Absolutely New Parts. Brass And Aluminum Can Be Soldered, Spread Slightly Worse, But It Saves Qualitatively. Use Latches, Such As A Piece Of Wire, For Soldering Defects. You Can Burn Any Combination Of Metals If You Learn To Warm Them Equally. Ordered The Second Time About The Stock. 23 Sep 2020 13:56

S***k from BELARUS